Autoplay
Autocomplete
Previous Lesson
Complete and Continue
The Scroll
1. Introduction to the course
Welcome to Edgar's Online Violinmaking Academy (13:45)
2. Scroll: Model and marking
2.1. - How to make the scroll template (20:47)
2.2. - Preparing the block for the scroll (20:34)
2.3. - Planing the block and marking the scroll with the template (21:27)
3. Cutting the Scroll
3.1. - Cutting the scroll; drilling the peg holes and cleaning it with the rasp (22:02)
3.2. - Cleaning the scroll block with rasp and chisel (8:16)
4. Marking the Pegbox and the volute of the Scroll
4.1. - Marking the center line and the pegbox (20:54)
4.2. - Marking with template and free the pegbox with bandsaw or by hand (21:24)
4.3. - Trimming the pegbox (10:33)
5. First Turn of the Scroll
5.1. - Cutting and Trimming the First Turn (21:04)
5.2. - Trimming First Turn (12:13)
6. Second Turn of the Scroll
6.1. - Cutting the Second Turn (20:53)
6.2. - Cleaning the Second Turn (20:43)
6.3. - Last Turn; Cutting the Eye and Cleaning up (11:42)
7. Creating the Chamfer on the Scroll
7.1. - Thoughts about the Design of your Scroll (19:02)
7.2. - How to make the Chamfer (15:33)
8. Peg Box
8.1. - Marking and Drilling the Peg Box (22:09)
8.2. - Carving and trimming the Peg Box (20:04)
8.3. - Trimming the Peg Box to Perfection (13:52)
9. Final Carving of the Scroll
9.1. - Watch how I hold the Neck and How I carve it (19:42)
9.2. - Carving the other side of the Scroll (12:58)
10. The Scroll's Fluting
10.1. - Fluting underneath and around the Volute (21:33)
10.2. - Fluting of the backside of the Scroll and Peg Box (18:43)
10.3. - Finishing and Cleaning the Scroll (7:04)
Teach online with
3.2. - Cleaning the scroll block with rasp and chisel
Lesson content locked
If you're already enrolled,
you'll need to login
.
Enroll in Course to Unlock